Download current exe (copy to your install directory)
Software License available here.
This program has only been tested under Windows XP. The program should but may not work under other versions of Windows.
This is very preliminary and incomplete. Feel free to come back or ask questions if you can't wait...
Select the serial port connected to the oscilloscope, and make sure the oscilloscope is configured as shown in the Help->Scope Setup menu.
The program only shows the COM ports that are installed when you run the program.
If you use a USB-serial converter, it may not be showing up as the same COM port each time.
Click on the "ID" button first. It allows a quick check that the scope and the program are talking. If it works, the scope's ID will print on the screen.
To acquire a waveform, click on "Acquire" and wait (typically about 38 seconds for a TDS 210 at 9600 bauds)
Then you will be prompted for a name under which the file will be saved. You can only save a file as a bitmap, but the file is not very big (about 38k).
The program saves the COM port setting when you exit.
As always, there are no guarantees. If you have questions, I will do my best to address them.
Bugs?? Nah!!!
Version: 1.0.0 (January 31, 2008)
* Initial release