====== Store Position On Trimble Thunderbolt ======

//John Miles, jmiles at pop.net//

//Wed Feb 6 23:05:00 EST 2008//

----

==== Message: [time-nuts] Setting Trimble Thunderbolt Stored Position ====

Short answer: go to Setup->Self-Survey, make sure the Enable and Save buttons are clicked, then hit "Set Survey," "Save Segment," and "Close." After that, do a Control->Restart Self-Survey. The alarm indication should go away once the survey process finishes.

You do not need to copy anything manually unless you want to specify a more-accurate survey position than what the Thunderbolt arrives at on its own.

-- john, KE5FX