This shows you the differences between two versions of the page.
| — |
blackberry:tether_your_blackberry [2013/01/08 19:00] (current) |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| + | ====== Tether Your Blackberry ====== | ||
| + | |||
| + | //From: www.crackberry.com: // | ||
| + | |||
| + | Verify that you have the Desktop Manager version 4.2 and the software bundle that came with the handheld installed on your computer. | ||
| + | |||
| + | Query the modem, using the modems properties: | ||
| + | |||
| + | - Click Start, Settings, Control Panel. | ||
| + | - Double-click on Phone and modem options. | ||
| + | - Click on the Modems tab. | ||
| + | - Left-click on the modem installed above. (Standard Modem or Standard Modem over Bluetooth) | ||
| + | - Click Properties. | ||
| + | - Click the Diagnostics tab. | ||
| + | - Click Query Modem. | ||
| + | - If dialog shows in the empty box, the modem is responding, then continue with the below steps. Otherwise contact WDS Tier III. | ||
| + | - Click the Advanced tab. | ||
| + | - Check the Extra Initialization Command feild and ensure it is correct. | ||
| + | |||
| + | Enter the initialization command: | ||
| + | |||
| + | - From your computer, click Start. | ||
| + | - Click Control Panel. | ||
| + | - Click Phone and Modem Options. | ||
| + | - Click the Modems tab. | ||
| + | - Scroll to Standard Modem. | ||
| + | - Click Properties. | ||
| + | - Click the Advanced tab. | ||
| + | - In the Extra Initialization Command field, enter the following: | ||
| + | |||
| + | ===== IMPORTANT SPECIAL CONFIGURATION STEP: ===== | ||
| + | |||
| + | |||
| + | Add only ONE of the following Extra initialization commands with the appropriate carrier specific command: | ||
| + | |||
| + | **TMOBILE USA:** | ||
| + | |||
| + | +cgdcont=1,"IP","wap.voicestream.com" | ||
| + | |||
| + | **Rogers Users:** | ||
| + | |||
| + | +cgdcont=1,"IP","internet.com" | ||
| + | |||
| + | **Cingular Blue/AT&T:** | ||
| + | |||
| + | +cgdcont=1,"IP","proxy" | ||
| + | |||
| + | **Cingular Orange:** | ||
| + | |||
| + | +cgdcont=1,"IP","ISP.CINGULAR" | ||
| + | |||
| + | **UK Vodafone:** | ||
| + | |||
| + | +cgdcont=1,"IP","internet" | ||
| + | |||
| + | **Verizon** - Keep blank | ||
| + | |||
| + | **Nextel/Telus** iDEN (untested) - Keep blank | ||
| + | |||
| + | **Sprint/Bell Mobility** CDMA (untested) - Keep blank | ||
| + | |||
| + | |||
| + | ===== Create dial-up networking : ===== | ||
| + | |||
| + | |||
| + | - From your computer, click Start, Settings, Control Panel, then Network Connections. | ||
| + | - Click Create a new connection, then Next. | ||
| + | - Select Connect to Internet. | ||
| + | - Select Set up my connection manually. | ||
| + | - Select Connect using a dial-up modem. | ||
| + | - Select the Standard Modem, then Next. | ||
| + | - Enter T-Mobile as the ISP Name. | ||
| + | - Enter *99# as the Phone number. | ||
| + | - Click Next. | ||
| + | - Leave the User name and Password feilds blank. | ||
| + | - Deselect all the optional check boxes in the bottom portion of this window. | ||
| + | - To create the connection, click Finish. | ||
| + | - In the Connect window, click Properties. | ||
| + | - In the Properties window, verify that Modem - Standard Modem appears beneath the Connect using heading, then click Configure. | ||
| + | - In the Modem Configuration window, clear the Enable hardware flow control check box and make sure none of the other check boxes are selected. | ||
| + | - Click OK. In the Properties window, click OK. | ||
| + | - In the Connect window, select Save this user name and password for the following users. | ||
| + | - Select the appropriate option. | ||
| + | - Confirm that the BlackBerry Desktop Manager is running. | ||
| + | - Open the web browser and navigate to any website to test the connection. | ||
| + | |||
| + | |||
| + | *IMPORTANT: BlackBerry Desktop Manager must be running, or error 692 will appear during the dial up attempt. (i have 1 connection set for the standard modem, usb cable, & 1 connection set for the standard modem over bluetooth and have no problems getting a connection without connecting to desktop manager) | ||
| + | |||
| + | If the laptop/PC connects but Internet Explorer does not, follow these steps: | ||
| + | |||
| + | - From Internet Explorer, click Tools, then Internet Options.... | ||
| + | - Click the Connections tab. | ||
| + | - From Dial-up and Virtual Private Network settings, select T-Mobile. | ||
| + | - Click Set Default. | ||
| + | - Select Dial whenever a network connection is not present. | ||
| + | - Click OK. | ||
| + | - Click OK again. | ||
| + | |||
| + | That should do it!! | ||