setting_up_ftdi_drivers_for_stellaris_board [KO4BB Wiki]

@@ Line 1: / Line 1: @@
+===== Setting up FTDI drivers for Stellaris board =====
+It seems the FTDI drivers are a real pain to install. The Micromint Eagle50E board uses the Luminary Micro driver for programming and debugging the board via USB.
+Every time I install the tools on a new computer, I have problems usually ending with a dll not properly installed (armlmiftdi.dll).
+Here is what I did the last time:
+After installing the tools and plugging the board in the computer, two new incomplete entries were created in Device Manager, under Universal Serial Bus Controllers:
+Both entries were named "Stellaris Evaluation Board" and neither had a driver installed (yellow icon in front of the entry).
+Right-click on the first entry, select "Update driver software", select "Browse my computer for driver software" and point it to C:\Program Files
+It will look for a while and finally install the driver. The entry is renamed "Stellaris Evaluation Board A".
+Do the same thing with the second entry, which will be renamed "Stellaris Evaluation Board B".
+Then a new incomplete entry will show up in Ports: Stellaris Virtual COM Port with the yellow icon. Do the same thing and you should be done.