[MyHosting.com]   [KO4BB Home Page]   [Manuals Home Page]   [KO4BB Wiki]

Store Position On Trimble Thunderbolt

John Miles, jmiles at pop.net

Wed Feb 6 23:05:00 EST 2008

Message: [time-nuts] Setting Trimble Thunderbolt Stored Position

Short answer: go to Setup→Self-Survey, make sure the Enable and Save buttons are clicked, then hit “Set Survey,” “Save Segment,” and “Close.” After that, do a Control→Restart Self-Survey. The alarm indication should go away once the survey process finishes.

You do not need to copy anything manually unless you want to specify a more-accurate survey position than what the Thunderbolt arrives at on its own.

– john, KE5FX

precision_timing/store_position_on_trimble_thunderbolt.txt · Last modified: 2013/01/08 19:00 (external edit)
Recent changes RSS feed Creative Commons License Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki
Except as noted, this entire site Copyright © 2002-2017. KO4BB All rights reserved.